How to Prepare Your Car While Acquiring Towing Services
No matter how effective safety measures and precautions you undertake while you are on a road trip in your car, accidental events might occur when you desperately need a professional towing service Melbourne. Needless to mention, the task of towing a car is pretty time-consuming. First, you will need to inform the car towing service providers, share your location, and wait until they arrive at your spot. Additionally, you cannot expect your car to be towed immediately after the professionals reach the spot.
You might need to wait for another couple of minutes when professionals prepare your vehicle to ensure smooth and uninterrupted transportation of your vehicle to your desired location, keeping it untouched. In case you want to accelerate the speed of the process and tow car faster, you need to prepare your car and keep it ready to transport before the arrival of the professionals. Through this write, we will walk you through the ways by which you can avoid damage during transport. So, let’s get started!
Effective Tips to Prepare Your Car for Towing
To experience a quick, seamless, and safe towing service Melbourne, follow the below-listed tips to make your car transport-ready:
- Ensure your vehicle is in neutral gear and the emergency brake is disengaged. This allows the vehicle to roll freely onto the tow truck.
- Check whether the steering wheel is unlocked. The tow car service provider must be able to steer your vehicle while loading and unloading.
- Turn off the vehicle alarm system and deactivate your vehicle’s alarm during towing and transport.
- Make sure that the tow truck has access to tow your vehicle. Remove any modifications like a front bumper guard that may obstruct the tow truck’s ability to lift and transport your vehicle.
- Inform the tow truck driver about any issues with your vehicle that may affect towing. Let the operator know about problems like low tire pressure, dead battery, or non-functioning brakes that could impact loading, transporting, or unloading your vehicle.
- Check that the tow truck is attached to designated tow points. Ensure the tow truck is securely connected to the proper tow points recommended in your vehicle owner’s manual to prevent damage.
Additional Tips to Take Extra Care of the Car Exterior to Avoid Potential Damage
While the above-listed tips ensure seamless transportation of your car, the following ones make sure that your vehicle remains intact and untouched when attaining towing service Melbourne.
Secure the Wheels
Ensure the wheels are securely fastened to the hubs to prevent them from rolling or falling off. Engage the emergency brake to lock the rear wheels in place. For front-wheel drive vehicles, place wheel chocks on each side of the front tires to prevent inadvertent movement.
Protect the Exterior Surface
Cover the entire vehicle with a high-quality protective cover, securing it in place with straps to shield the paint from scratches, dings, and debris. Padding like towels can be placed under straps and securing points.
Protect the Loose Parts of Your Car
If there are any other loose components in your car, such as spoilers, tog lights, antennas, or trim that are vulnerable to the threats of damage during towing, make sure to remove and store them inside the vehicle. Moreover, things like tool kits, jacks, and spare tires should also be kept in a secure place to avoid damage.
Detach the Car Battery
Prior to seeking professional towing service Melbourne, it is critical to disconnect the battery to avoid potential electrical issues. Disconnecting the battery can reduce the risk of power surges, short circuits, and other issues that could potentially damage your vehicle’s electrical systems during transit.
Here’s how you can do it:
- First, you need to locate the negative battery cable and remove the cable from the terminal.
- Then, you need to clean the battery terminals using a wire brush to remove corrosion
- Finally, disconnect the battery cables and store them safely before availing towing service Melbourne.
Be sure to have your battery reconnected as soon as possible after towing to avoid draining the battery.
Wrapping Up
Hopefully, the write-up has given you a clear insight into how to prepare your vehicle while acquiring professional towing service Melbourne to ensure quick and smooth transportation of your vehicle. Additionally, check whether the gas tank of your car is full to avoid damage to the fuel pump and other components. Not to mention, don’t forget to gather important documentation like your vehicle’s manual, insurance, and registration to provide to the tow truck operator.
Make sure to keep in mind the key steps that we have mentioned in the write-up. By following these best practices will help facilitate an efficient towing process and minimise potential issues with your vehicle during transportation. With some advanced preparation and partnering with the best tow car service provider, you can have your vehicle towed securely and safely.
